Electrostatic Condensate Separation with JUNIPER at the Point-Of-Use

Electrostatic Condensate Separator JUNIPER
Electrostatic Condensate Separation with JUNIPER

The electrostatic condensate separator JUNIPER reliably and cost-effectively removes condensable organic compounds (VOC´s) like those that accrue in manufacturing fabs in the photovoltaic industry. Many of these organic compounds have a bad odor and many of them are toxic. JUNIPER is capable of handling waste gas flows up to 1000 m3/h. Separation rates are above up to 95 %. The system prevents exhaust blockage through condensates by reducing the overall carbon content of waste gases, and in addition, separates dusts from the waste gases. Essential advantages of this system are its low energy consumption and small foot print. Access for operating and maintenance is found on the front and back sides as at most DAS tools

JUNIPER- Operating Principle

With JUNIPER waste gas flows are entered quickly into the system. Hot waste gas enters a cooler and the temperature is reduced to the organic compounds’ condensation temperature. Afterwards, aerosols are channeled through separator columns, where its ionized, and condensed components are deposited on grounded metal tubes. The separated condensate flows back into the tank where it is collected. It can be pumped out automatically or drained manually.  

The following equipment options are available for all JUNIPER systems:

  • Power Supply: 3 x 400 V/50 Hz or 3 x 208 V/60 Hz
  • Condensate pump
  • Signal Tower
  • Drip Pan
  • Earthquake Safety Kit
Principle Electrostatic Condensate Separation by DAS JUNIPER
JUNIPER- Operating Principle

Your Advantages

  • Efficient reduction of condensable organic carbon compounds
  • Collection of the condensate in a tank
  • Collection of dust particles
  • High safety standards (all critical parameters are sensor monitored)
  • Interface to upstream process systems

Technical Data

  • Dimensions (B x T x H):
    1170 mm x 1180 mm x 2110
  • Access to maintenance area on front and back side
  • Gas entry: DN250
  • Gas outlet: DN150
  • Gas flow: max. 1000 m3/h
Looking for Advice?

If you would like to get in contact with us, please use the following e-mail form or simply call us.

Your details
+1 844 862-1662Give us a call! We are looking forward to providing a further information on our products for waste gas treatment.