Point-of-Use Waste Gas Treatment with ESCAPE (burn/wet)

DAS Waste Gas Treatment with ESCAPE
Process waste gas treatment with ESCAPE

The ESCAPE technology offers an optimum combination of the two operating procedures burning & scrubbing in the smallest possible space. A concept, which many DAS systems for waste gas treatment use. It is an effective and highly versatile technology for point-of-use waste gas treatment with a low cost of ownership. Based on this burn/wet-technology we have developed the ESCAPE product line, which offers flexible and customized applications for the abatement of almost all process waste gases in the semiconductor and photovoltaic industries. Both heights and media supply are variable. All ESCAPE systems have a small footprint with service and maintenance access from the front and back. Installation is quick and easy and does not require a specialized equipment. Operation costs and general safety can be optimized with a process tool interface.  

The following equipment options are available for all ESCAPE systems:

  • Power Supply: 3 x 400 V/50 Hz or  3 x 208 V/60 Hz
  • Fuel Gas: NG, LPG, H2
  • Oxidant: O2, CDA
  • Heated feed lines and inlets
  • Process-Tool-Interface
  • Signal Tower
  • Drip Pan
  • Earthquake Safety Kit
  • Monitoring
  • SEMI S2 certification

Operating Principle of ESCAPE Waste Gas Treatment Systems

Hazardous substances of process waste gases are abated directly from where they originate (Point-of-Use, POU). Waste gases are fed into a ring-shaped burner apparatus. Depending on the chemical composition of the waste gases, various reactions take place (oxidation, reduction, pyrolysis). In the subsequent scrubbing process, soluble, gaseous and solid compounds generated by combustion are absorbed and cooled down by a suitable scrubbing liquid. The immediate scrubbing neutralizes combustion products such as hydrogen halides and all remaining residual gases meet the strict standards of German air pollution law (TA Luft).

ESCAPE Waste Gas Treatment Principle
Operating Principle of ESCAPE Waste Gas Treatment Systems
DAS Waste Gas Treatment with ESCAPE INLINE
ESCAPE INLINE – Waste Gas Treatment for Process Waste Gas from Epitaxy

ESCAPE INLINE - Our Basic System for Waste Gas Treatment

ESCAPE INLINE is our tried and tested basic system, optimized for up to four independent inlets of semiconductor and photovoltaic process tools. It runs on diverse fuel gases and scrubber liquids. As an alternative to the scrubber liquid’s feed-through-system the reactor can be equipped with a water-conserving closed-loop design.

Features

  • Up to 4 independent inlets
  • Runs with different fuel gases
  • Low water consumption through closed-loop design
  • Available in 2 sizes

Technical Data

  • Dimensions (W x D x H):
    855 mm x 675 mm x 1800/2070 mm
  • Access to maintenance area on front and back side
  • Gas entry: max. 4 x DN25 or DN40
  • Gas outlet: DN100
Epitaxy Waste Gas Treatment with ESCAPE PLUS by DAS
Waste Gas Treatment for Epitaxy with ESCAPE PLUS

Process Waste Gas from Epitaxy is Treated by ESCAPE PLUS

ESCAPE PLUS was specifically developed for applications involving large amounts of hydrogen as they typically occur in epitaxy processes. The system runs on various fuel gases, meets the highest safety standards and is equipped with a water feed-through-system. It enables the discharge of large amounts of water without a cooling system.

Features

  • Up to 4 independent inlets
  • Runs with different fuel gases
  • Available in 2 sizes

Technical Data

  • Dimensions (W x D x H):
    855 mm x 675 mm x 1800/2070 mm
  • Access to maintenance area on front and back side
  • Gas entry: max. 4 x DN25 or DN40
  • Gas outlet: DN100
Point of Use Waste Gas Treatment with ESCAPE DUO
ESCAPE DUO – Waste Gas Treatment with Back-Up-Function due to two Burn-Wet-Systems

Waste Gas Treatment with Backup-Function – ESCAPE DUO

ESCAPE DUO is a double-reactor offering two scrubbing systems that can operate simultaneously. It is optimized for up to four independent inlets of semiconductor and photovoltaic  process tools. In case of malfunction or maintenance on one reactor, the other backs up the treatment of all waste gases (internal back-up), which ensures the equipment’s near 100 % uptime.

Features

  • Up to 2 independent waste gas and backup lines per reactor
  • Near 100 % operation time through backup function
  • Second reactor allows uninterrupted operation during maintenance
  • Runs with different fuel gases
  • Low water consumption through closed-loop design
  • Available in two sizes

Technical Data

  • Dimensions (W x D x H):
    1650 mm x 675 mm x 1800/2070 mm
  • Access to maintenance area on front and back side
  • Gas entry: max. 2 x 2 DN25 or DN40
  • Gas outlet: max. 2 x DN100
Looking for Advice?

If you would like to get in contact with us, please use the following e-mail form or simply call us.

Your details
+1 844 862-1662Give us a call! We are looking forward to providing a further information on our products for waste gas treatment.